MBKM Scientific Research: Experience in Nano Aging Asphalt Research Program at UMS: Riset Keilmuan MBKM: Pengalaman Mengikuti Program Riset Aspal Nano Aging di UMS

Monica Rudyanto; Agus Riyanto; Rama Rizana; Sri Sunarjono

Authors

Monica Rudyanto Universitas Muhammadiyah Surakarta
Agus Riyanto Universitas Muhammadiyah Surakarta
Rama Rizana Universitas Muhammadiyah Surakarta
Sri Sunarjono Universitas Muhammadiyah Surakarta

Keywords:

MBKM Research, Nano Aging Asphalt

Abstract

The Merdeka Learning Campus Merdeka Program is an application of collaborative learning, which aims to strive for graduate abilities, both soft skills and hard skills, so that graduates are ready and in accordance with the demands of the times, planning graduates as future leaders with character. This research is part of the first MBKM Research in the Civil Engineering Study Program at Universitas Muhammadiyah Surakarta, which involves several parties outside the scope of the Civil Engineering discipline. The purpose of this research is to share the experience of the MBKM research program, as well as to find out the results of nano aging asphalt. The method used is laboratory experiments in the form of testing the physical properties of asphalt (Penetration, Softening Point, Specific Weight, Ductility), and supporting testing results (SEM-EDX and FTIR). The results showed that the MBKM research program demonstrated the continuity between engineering sciences, as well as improved the quality of nano aging asphalt.

References

Nizam, “MBKM Guidebook,” hal. 1–42, 2020.

S. Ramadanty dan H. Martinus, “Organizational Communication: Communication and Motivation in The Workplace,” Humaniora, vol. 7, no. 1, hal. 77, 2016, doi: 10.21512/humaniora.v7i1.3490.

S. Baskaran dan K. Mehta, “What is innovation anyway? Youth perspectives from resource-constrained environments,” Technovation, vol. 52, hal. 4–17, 2016.

S. E. Priana, “Analisa Faktor Penyebab Kerusakan Jalan (Studi Kasus Ruas Jalan Lingkar Utara Kota Padang Panjang),” Rang Tek. J., vol. 1, no. 1, 2018, doi: 10.31869/rtj.v1i1.609.

J. U. D. Hatmoko, B. H. Setiadji, dan M. A. Wibowo, “Investigating causal factors of road damage: a case study,” MATEC Web Conf., vol. 258, hal. 02007, 2019, doi: 10.1051/matecconf/201925802007.

N. A. Munggarani dan A. Wibowo, “Kajian Faktor-Faktor Penyebab Kerusakan Dini Perkerasan jalan Lentur dan Pengaruhnya terhadap Biaya Penanganan,” J. Infrastruktur, vol. 3, no. 01, hal. 9–18, 2017, [Daring]. Tersedia pada: https://bpsdm.pu.go.id/kms/admin/_assets/uploads/adminkms/papers/BM/KMS_JURNAL_20180726113633.pdf

M. N. Hidayat dan W. Ritonga, “Pengaruh Campuran Abu Kulit Kakaoterhadap Karakteristik Aspal,” Einstein, vol. 10, no. 2, hal. 42, 2022, doi: 10.24114/einstein.v10i2.36272.

Z. Yang dkk., “Effect of aging on chemical and rheological properties of bitumen,” Polymers (Basel)., vol. 10, no. 12, 2018, doi: 10.3390/polym10121345.

B. Afriyanto, E. W. Indriyati, dan P. Hardini, “Analisis Variasi Kadar Limbah Plastik Low Density Polyethylene (LDPE) Dalam Aspal Modifikasi Terhadap Karakteristik Dasar Aspal,” Pros. Simp. Forum Stud. Transp. antar Perguru. Tinggi ke-21, hal. 366–377, 2018.

W. N. A. Wan Azahar, M. Bujang, R. Putra Jaya, M. R. Hainin, M. M. A. Aziz, dan N. Ngadi, “Application of nanotechnology in asphalt binder: A conspectus and overview,” J. Teknol., vol. 76, no. 14, hal. 85–89, 2015, doi: 10.11113/jt.v76.5847.

M. Sohrabi, H. Shirmohammadi, dan G. H. Hamedi, “Investigating the effect of modifying aggregate surface by micronized calcium carbonate on increasing the moisture resistance of asphalt mixtures,” Period. Polytech. Civ. Eng., vol. 63, no. 1, hal. 63–76, 2019, doi: 10.3311/PPci.11632.

J. Crucho dan J. Neves, “Effect of nano hydrotalcite on the aging resistance of a high binder content stone mastic asphalt,” Appl. Sci., vol. 11, no. 21, 2021, doi: 10.3390/app11219971.

J. E. Hulla, S. C. Sahu, dan A. W. Hayes, “Nanotechnology: History and future,” Hum. Exp. Toxicol., vol. 34, no. 12, hal. 1318–1321, 2015, doi: 10.1177/0960327115603588.

T. Prasad Yadav, R. Manohar Yadav, dan D. Pratap Singh, “Mechanical Milling: a Top Down Approach for the Synthesis of Nanomaterials and Nanocomposites,” Nanosci. Nanotechnol., vol. 2, no. 3, hal. 22–48, 2012, doi: 10.5923/j.nn.20120203.01.

Direktorat Jenderal Bina Marga, “Spesifikasi Umum 2018,” Edaran Dirjen Bina Marga Nomor 02/SE/Db/2018, no. Revisi 2, hal. 6.1-6.104, 2018.

W. Haroon, N. Ahmad, dan N. Mashaan, “Effect of Quartz Nano-Particles on the Performance Characteristics of Asphalt Mixture,” Infrastructures, vol. 7, no. 5, 2022, doi: 10.3390/infrastructures7050060.

A. B. D. Nandiyanto, R. Oktiani, dan R. Ragadhita, “How to read and interpret ftir spectroscope of organic material,” Indones. J. Sci. Technol., vol. 4, no. 1, hal. 97–118, 2019, doi: 10.17509/ijost.v4i1.15806.

N. Susanti dkk., “Pengaruh Perlakuan Termal Terhadap Karakteristik Aspal Komposit Berbasis Silika Sekam Padi,” J. Teor. dan Apl. Fis., vol. 8, no. 1, hal. 120–126, 2020.